Omnia

Ansible playbook-based tools for deploying Slurm and Kubernetes clusters for High Performance Computing, Machine Learning, Deep Learning, and High-Performance Data Analytics

This project is maintained by dellhpc

Parameters in ethernet_vars.yml

This file is located in /control_plane/input_params

Variables Default, choices Description
os10_config <ul><li>“interface vlan1”</li><li>“exit”</li></ul> Global configurations for the switch.
breakout_value <ul><li>10g-4x</li><li>5g-4x</li><li>40g-1x</li><li>50g-2x</li><li>100g-1x</li></ul> By default, all ports are configured in the 10g-4x breakout mode in which a QSFP28 or QSFP+ port is split into four 10G interfaces. For more information about the breakout modes, see Configure breakout mode.
os10_interface By default: <ul><li>Port description is provided.</li> <li>Each interface is set to “up” state.</li><li>The fanout/breakout mode for 1/1/1 to 1/1/31 is as per the value set in the breakout_value variable.</li> Update the individual interfaces of the Dell PowerSwitch S5232F-ON. </br>The interfaces are from ethernet 1/1/1 to ethernet 1/1/34. By default, the breakout mode is set for 1/1/1 to 1/1/31. </br>Note: The playbooks will fail if any invalid configurations are entered.
save_changes_to_startup <ul><li>false</li><li>true</li></ul> Change it to “true” only when you are certain that the updated configurations and commands are valid. </br>WARNING: When set to “true”, the startup configuration file is updated. If incorrect configurations or commands are entered, the Ethernet switches may not operate as expected.